Posts Tagged ‘products and services’

01.14
19

Cleaning And Purifying After A Fire

by HFCadmin ·

After the fire, there is a problem that requires a quick solution – cleaning and purification, and in some situations and repairs. Undesirable odors are eliminated rather easily with the use of chemicals, and more sophisticated pollution are removed only with the help of professionals and special ways. Detailed surface patch is likely if the fire affected sites is negligible. If the same fire damaged the house identity overhaul equipment, there are many problems with knitted with the cleaning after the fire, which effectively solved by cleaning technology soda-blasting. Soda Blasting – cleaning technology, in which sodium bicarbonate under pressure is applied to the surface using compressed air through a special machine blastingovy.

The method is similar to the traditional blast cleaning, but it has an advantage when cleaning the sensor, so as not damage the work surface and is completely safe for the environment and human health. Sodium bicarbonate is water soluble and environmentally safe. Soda blasting is effective in such work, just cleaning up after a fire. Using this method, carbon black and soot removed from any materials (wood, concrete, metal, etc.) and surfaces (walls, place a ceiling). Technology-soda blasting can not only clean the burnt parts, but to prepare damaged items for repair, painting and restoration.

Also in the restoration after the fire fading unwanted odors from the premises because the smoke and soot are removed completely. Cleaning after a fire using soda-blasting – "clean" procedure, so that water is used in a minimal amount or no use, and waste of soda – Dirty (200-300 grams per minute). Soda Blasting – the best way out if you need cleaning after a fire. Damaged surface effectively cleaned and ready for restoration in the shortest possible time. This technology removes the toxic sludge, soot, smoke and odors after a fire. Plus all the advantages of the soda-blasting can reduce the cost of all cleaning up after a fire.

01.14
19

Shower Room Class

by HFCadmin ·

Already at the stage of deciding on the need for repair, you should try to formulate as precisely as possible all their desires, then to choose the right way to implement them. This is, in principle, relates to the repair of any room, but especially – to repair the bathroom and toilet rooms. Boring wallpaper can perekleit, repaint the ceiling, doors all replaced, but the newly renovated bathroom is difficult both in terms of time unavailability of health benefits, as well as from the material point of view. Therefore, we must provide in advance all. The main material for finishing the bathroom is now a bar.

Her varied and textured color range to suit your needs. First of all, you need to determine the quality of the tiles. Tiles for walls and laying on the floor differ from each other by their physical qualities. Wall is used as Typically, glazed ceramic tile, which has low permeability and high resistance to aggressive chemicals, which make up household chemicals for cleaning, polishing and disinfection. Tile for sex, in addition to the already mentioned properties, must have high strength and not be slippery.

Tile varies by class abrasion and water absorption. Tile first class less abrasion wear resistant, than fifth, but in the case of a bathroom in an apartment that does not play a role. Wear resistance is an important factor in the health rooms in public places. But the class of water absorption (of 4 classes) is important. For finishing bathroom tile to choose the first class (3% moisture absorption), in extreme cases – the second one. The second step is to understand the desired color scheme bathroom. It is fashionable to use in bright finish materials a large figure, but whether it is reasonable in the standard bath, measuring 3 square meters. m? Bright colors are out of fashion, can quickly get bored.

10.13
16

Nutrition And Health

by HFCadmin ·

Enamelware and its advantages in the kitchen. These days health care is a top priority. An important factor in maintaining health is proper nutrition. You cook the food? How do you prepare? Not secret that the direct interaction of food with the metal, chemical reactions take place, during which stand out hazardous substances. You say, 'But I'm using utensils made of stainless steel, ceramics and plastics. Hear other arguments on the topic with Senator From Kentucky. What are they bad? " Yes, stainless steel utensils are not directly interact with the food, but only if it's high-quality steel, but it's not cheap. Now the market is full of cheap crockery from 'stainless steel, ceramic, plastic ', an unknown manufacturer and does not even average quality, that is not a guarantor of security, and the turnover, the use of substandard vessels may not want to affect your health.

'All new is well forgotten old. " Enamelware. Probably not a family which did not exist before – a pot, cups, bowls, covered with enamel. Do you have a stereotype, enamelware – it's buckets and pots to give? No it is not, enamelware was beautiful, with the original design of shapes and colors. The fundamental property of enamelware – it secure. Items in enamelware, not in contact with metal, so – as the enamel is applied to the surface of glass-ceramic material.

As a result, all products will be in contact with the metal does not, but with the glass-ceramic coating, thereby avoiding getting into the food, the ion metal. Modern enamelware is suitable for all types of board and can be washed in dishwashers. Visit our website and make sure that emalposuda.rf enamelware can make you happy and lift the mood. In Internet – shop Emalposuda.rf presented dishes (pan, saucepan, kettle) marki'VITROSS. " 'VITROSS'-Health care. You can make any variation of the order itself. Proposed enamelware matches requirements – GOST 24788-2001.